Jansen HS-22A62E
is a top-class wood splitter. The advantage of this device
is that it can be used both vertically and horizontally!
It has an actual
splitting force of 22 tons
and a powerful
2.2 kW electric motor
that is powered by 400 volts. Thanks to the revolutionary coordination of the performance of the electric motor and the pump, this log splitter achieves at least the same performance as comparable log splitters with a 5 kW motor. This also means a huge reduction in operating costs and, consequently, a high level of efficiency.
The splitting pressure of our splitters is measured directly on the splitter, so this information also corresponds to the actual splitting pressure. Many other suppliers quote unrealistic values that are never achieved in practice.
The length of the divided part can be up to 62 cm.
The splitter is extremely easy to use. Thanks to the electric engine, the noise level is much lower than in the petrol version.
The set includes a cross wedge that simply attaches to the splitting wedge.
Switching between wedge and cross is done in seconds! When using a splitting cross, make sure that the diameter of the trunk is smaller than when splitting with a wedge!
With a splitting wedge or a 30 cm long cross wedge
, you can also split thicker logs with a larger diameter in one operation. This often does not work with shorter splitting wedges and the log often has to be rotated 180 degrees.
The hydraulics are designed in such a way that the splitting wedge can be stopped in any position and can be moved forward or backward. The force is always present and the splitting wedge does not have to be returned to the starting position repeatedly, as is the case with many competing products.
Cylinder diameter 115 mm, piston rod 45 mm.
The Jansen HS-22A62E can be easily towed to the job site using the ball hitch.
The device is not approved for transport on public roads. Due to its small overall width (approx. 105 cm), the device can also be transported on a regular trailer.
ATTENTION
:
The device is delivered well packed and disassembled in a wooden box. Final assembly will take approximately 3-4 hours. The scope of delivery includes an operating manual in German. Assembly is usually easy, but may require two people to do the job as the individual parts are heavy! The first filling of the device requires approximately 9.5 liters of HLP46 hydraulic oil.
