Drilling rig Fraste Multidrill MD/ML

Axles: 4 x 4 x

1 winches

With approx. 51 pcs. drill rods of 3m (for flush drilling), ie drilling depth approx. 150m - and 3 pcs. drill crowns (see photos) - if you buy several drill rods, the machine can drill down to a depth of 200m. With water pump. MAST: The broker is made of strong H profile with side guide which forms the guide for the broker car. The tightening force on the rotary motor comes from a gear motor mounted on the mast top. Max travel of rotary head 5200 mm, Max lifting force on rotary head 3200 kg, Max pressure on rotary head 3200 kg. Bottom clamp for Ø 60 mm to 280 mm casing, swivel type max opening 500 mm. Rotary head R012D100 - Rotary head for direct rinsing: Rotary head spindle has max Ø 100 mm bore drilled with mudinjeclion swivel unit ID 100 mm, Max torque in high range 650 kgm at 126 rpm, Max torque in low range 325 kgm at 63 rpm The rotary head has two hydraulics motors which are connected in parallel, the rotary head can be hydraulically tilted 90 degrees. Game: The hydraulic hoisting winch has a lifting capacity of 2000 kg and a maximum wire capacity of 30 m ø 10 mm - speed 40 m per min. Frifald percussion: Frifald percussion lifting capacity 500 kg with 500 mm lifting height and from 0 to 40 beats per min. XL Model. Centrifugal pump Type Capari MEC A3 / 80 A Hydraulic centrifugal mud pump speed controllable from control panel. Max output 3000 I per min.Max bar 8 flush hose 100 mm. Drill diameter: 250mm down to 200m depth and 100mm down to 100m depth.

Chassis: MAN 13.240